| Cryo-Water-Jacket CO2 Microscope Stage Incubator |
|
- We are the Authorized Distributor for Okolab products in the US
- Superior incubation stability for long termexperiments
- Models to fit all XY stages on the market
- Suitable for high magnification microscopy
- Temperature control from10C° to 50°C
- Wide selection of cell culture support adapters
|
|
| Objective Warmers |
|
- Reduces thermal gradient between objective and sample
- No direct contact between warmer and objective
- Heated collar warms the surrounding air which then gently warms the objective
- Fits microscope objectives from most manufactures
- Can be powered from Warner’s low noise TC-324B / TC344B temperature controller or a12 volt battery for sensitive electrophysiology applications
|
|
| Okolab Electric - CO2 Microscope Stage Incubator |
|
- We are the Authorized Distributor for Okolab products in the US
- Low cost solution for long term experiments
- One model fits all XY stages
- Suitable for high magnification microscopy
- Temperature control from Ambient + 3°C to 50°C
- Wide selection of cell culture support adapters
|
|
| WP-10 and WP-16 Warmed Platforms |
|
These warmed platforms are designed to maintain the temperature of 35 and 50 mm Petri dishes, as well as glass slides and chambered slides, on a microscope stage. |
|
| THP Series Holders for Theta Glass |
|
- Allows microinjection using theta glass
- Kit includes everything needed
- Lightweight, acrylic electrode holder
- Easy coupling to pressure source
- Rated to 100 PSI
|
|
| CV-30 CytoVivaTM Environmental Chamber |
|
- Designed for the CytoVivaTM high resolution imaging system
- Allows long-term studies of live cells
- Supports oil immersion contact with the CytoVivaTM high resolution illumination system
- Simultaneous observation of fluorescent and non-fluorescent samples
|
|
| HiZ-223 Dual Channel Differential Electrometer |
|
- 1015Ω Input Resistance
- Designed for measurements with ion-selective microelectrodes
- Probe Test Port
- Standby mode protects input amplifiers
- Driven Guard Shield reduces stray capacity and noise
|
|
| TC-144 Dual Temperature Controller |
|
- Ambient to 65 °C temperature range
- Compatible with Warner's objective warmer, syringe warmers, and warmed stage insert
- Can be powered from 12 volt battery for sensitive electrophysiology applications
- Large, easy to read LED display
|
|
| TM-3 Three-Scale Thermistor Temperature Monitor |
|
- Celsius, Fahrenheit, or Absolute (Kelvin) scales
- Analog output for data acquisition systems or pen recorders
- Dust-proof, splash-proof and battery powered for use in the field
- Compatible with any 10Ω unical thermistor
- Large easy to read LCD display
|
|
| TB-3 CS Thermal Insert |
|
- Designed for use with Prior Scientific NZ200CE NanoScanZ Piezo Z stage
- Optimized for rectangular chambered slides and chambered coverglass
- Can accept up to 1 x 3' slides
- Temperature control from 5° to 50°C
- Magnetic stainless steel allows use of magnetic holders
- Additional stage adapters available
|
|
| TB-3 CCD Thermal Insert |
|
- Designed for use with Prior Scientific NZ200CE NanoScanZ Piezo Z stage
- Optimized for 35 mm culture dishes and Warner RC-40 quick change imaging chambers
- Adapters for all major brand 35 mm dishes
- Temperature control from 5° to 50°C
- Magnetic stainless steel allows use of magnetic holders
- Additional stage adapters available
|
|
| CSH-1 Heated Platform for 1x3 Inch Slides |
|
- Open design for easy cell access
- Ideal for use with chambered coverglass
- Magnetic stainless steel platforms allow use of magnetic holders
- Stage Adapters permit mounting on all major microscopes
|
|
